Vanair Air n Arc 300 Air Compressor/Generator/Welder/Battery Booster System
Equipment Specifics
The Air N Arc 300 system, provides more efficient use of your truck bed and reduces cost by combining five power sources -Rotary screw on-demand air compressor, 7 kW generator, 300 AMP welder, battery booster and battery charger – into one single unit. Designed as a true two generator system, the Air N Arc 300 series allows multi-functioning such as welding and generator for lights for night time service.
If you’re needing to save some space and increase your payload, the Air n Arc 300 Compact is a great option! Coming in 7.5 inches shorter and up to 100 lbs lighter than the standard Air N Arc 300 with fuel tank, the new compact unit provides the flexibility and space-saving capability to mount the unit outside the body of the vehicle while still maintaining ground clearance.
| Engine: | Gas: 26.5 HP EFI Kohler®, Air Cooled/ Diesel: 25 HP Kubota®, Liquid Cooled (Tier 4 Compliant) |
|---|---|
| Compressor Type: | Rotary screw |
| Max Pressure: | 175 PSI |
| CFM Rating: | 40 CFM |
| Generator Wattage: | 7 kW peak – 6.8 kW continuous, AC Power, 60 Hz, Single Phase, 120V and 240V Outlets |
| Welder Amperage: | High frequency DC welding, 270 AMPs at 100% duty cycle CC: 40-300 AMPs operating range, CV: 15-30 Volts |
| Battery Charger/Booster: | 300 AMPs 12V/24V Boost, 50 AMP 12V Charge |
| Drive System: | Belt driven |
| Fuel Capacity (Gal.): | 12 Gal. Integral Tank (Optional Remote Tank or Plumb to Chassis) |
Gas
Dimensions (In.)
Foot Print – 47.1L x 21.5W x 30.9H
with fittings – 47.1 L x 24.6 W x 30.9 H*
Dry weight (Lbs.) – 700 Lbs.
**Dimensions listed are not a complete representation of total space necessary. Please consult Vanair for overall space and air requirements.
Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.
Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
Diesel
Dimensions –
Foot Print (In.)–47.5L x 21.0W x 33.4H*
with fittings (In.)–48.0L x 25.0Wx33.4H*
Dry weight (Lbs.) – 870 Lbs.
**Dimensions listed are not a complete representation of total space necessary. Please consult Vanair for overall space and air requirements.
Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.
Do not weld with the electrode holder connected to the negative port and the work piece connected to the vehicle. Bodily harm and equipment damage may occur.
