{"slide_to_show":"4","slide_to_scroll":"1","autoplay":"true","autoplay_speed":"3000","speed":"300","arrows":"true","dots":"true","rtl":"false"}
Equipment Specifics
The Bemis post puller is a great option when looking for a durable post pulling system! Post pullers can be installed to either the front of rear of your truck. Bemis post pullers are available in two models: PPF-203 and PPF-295.
PPF 203 REGULAR DUTY
- Requires 3/4 ton or heavier truck.
- 10,000 lb. of pulling power with a 91.5” reach from pivot point.
- Note: PPF203 with 12v pump is not appropriate for over 25% duty cycle.
- The puller can be supplied without the electric hydraulic pump for mounting on vehicles that would have another suitable hydraulic power source available. (recommended for high duty cycles). This is the Model PPF203X.
- 10,000 lb. jaw set included.
- Approximate total weight added to vehicle is approximately 300 lb.
- Shipping weight approximately 450 lb.
- Available with power unit (PPF203) or without power unit (PPF203X)
PPF295 HEAVY DUTY
- Requires a 17,500 GVW vehicle with a hydraulic system of 4-6 GPM @ 2,500 PSI.
- Posts gripped for pulling with chains of suitable working load strength (31,000 lb. or greater).
- 30,000 lb. of pulling power with a 119” reach from pivot point.
- Installed weight approximately 425 lb.
- Shipping weight 700 lb.
- JAW SET IS NOT INCLUDED, but may be purchased as optional equipment for use for maximum capacity of 3 1/4” diameter poles or 3 1/2” rectangle posts.
